I’m sure there’s lots of resource orders out there in the system. When an incident get this size there’s a lot of planning needed. Patients
Is there orders for DINS or DINM on there?
1 Like
Demob tomorrow from oak fire. Heading straight to McKinney.
12 Likes
What are you Saaltyyy?
4 Likes
What agency if I may ask?
1 Like
Same with us.
2 Likes
Single agency dozer out of TGU early afternoon to the KNF. Passed LMU 2240 dozer heading up 5 in Shasta Co early evening. LE friend heading up to Yreka for evac mutual aid was passed by AZ-TNF Globe IHC bus.
5 Likes
Globe demobed from the Oak
4 Likes
6 Likes
Seems like a small amount of critical resources needed for a fire this size. Any talk of a CALFIRE team for if/when it makes it to the SRA / Yreka ? What team is up?
1 Like
#McKinneyFire - 7/31/22
51,468 acres
0% Contained
The fire is being managed under Unified Command:CAL FIRE Siskiyou Unit and U.S. Forest Service - Klamath National Forest
2 Likes
CA-KNF-MCKINNEY? - #168 by logchief1https://forums.wildfireintel.org/t/ca-knf-mckinney/22540/168?u=fire955
Transition to unified command with CA Team 10 (Mack) and CALFIRE will occur at 0700 today. Type 1 CA Team 2 (Johnny) is assigned and will in-brief today @ 1200
4 Likes
I’m not making a blanket statement. No discussion. I am explicitly making a watchout for this incident for this 205. Those command nets should NOT have RX tones.
5 Likes
There are many command nets that have both RX and Tx tone protected…especially if there are other incidents close by
4 Likes
This is fixed forest infrastructure, not portable NIFC gear where they are trying to isolate nearby incidents. Why is a watchout up for discussion, especially on IA thread? Full stop. Stop muddying the water people.
9 Likes
You have a very important safety watchout there. If you are on this fire and not hearing command, try removing the rx tone if you have it programmed in there. Depending on your radio you may be able to disable tone protection on the rx side without reprogramming. The old bricks can be done by turning the squelch knob off of the detent, if I remember correctly. I think the KNG may have an “omon” button that does something similar, depending on how they are programmed.
5 Likes
My guess is a cut and paste issue on the 205.
1 Like
KNF BLK regularly doesn’t have an Rx tone. I just spoke with the COML, the Rx tone was an error on the 205 however all radios cloned didnt recieve that error. Agree it can be a safety issue if someone had hand programmed per the 205. As previously stated if that occurs unlock channel guard or turn monitor mode on.
7 Likes